Md. Shamsuzzaman
Assistant Professor, BSc WUB, MSc BUTEX
Assistant Professor, Department of Textile Engineering
https://orcid.org/0000-0002-5161-0998
Avenue 6 Road & Lake Drive Road, Sector # 17/H,Uttara, Dhaka-1230
Personal profile
Biography
Md. Shamsuzzaman is currently serving as an Assistant Professor and Coordinator in the Department of Textile Engineering, where he has been actively contributing since September 2017. He began his academic career as a Lecturer, was promoted to Senior Lecturer on July 1, 2021, and further promoted to Assistant Professor on November 1, 2022, recognizing his excellence in teaching, research, and academic leadership. Alongside his academic roles, he has been instrumental in departmental coordination, curriculum development, and fostering strong industry-academia linkages.
Before joining academia, he gained significant professional experience in the ready-made garments (RMG) and textile sector. He worked at Silken Sewing Ltd. (Platinum, LEED certified) for 1.8 years, where he contributed to sustainable manufacturing practices and production management, and also spent nearly a year with AJI Group, gaining hands-on expertise in apparel operations and quality management. These professional experiences provided him with practical insights into sustainability, lean production, compliance, and supply chain processes in the global fashion industry.
He completed his Bachelor of Science (B.Sc.) in Textile Engineering at the World University of Bangladesh in 2015, specializing in Apparel Manufacturing. His undergraduate thesis focused on production efficiency and quality control systems in garment factories, reflecting his early interest in industrial optimization. He then pursued a Master of Science (M.Sc.) in Textile Engineering at the Bangladesh University of Textiles (BUTEX), which he successfully completed in 2019. His Master’s specialization was in Apparel Manufacturing, and his thesis, titled “Quantifying environmental sustainability of denim garments washing factories through effluent analysis: A case study in Bangladesh”, was later published in Journal of Cleaner Production (ScienceDirect), marking a significant contribution to research on sustainability in textile wet processing and management.
Research Interests
Sustainable fashion and textiles, Digitalization, Environmental sustainability, Circular fashion economy, Waste management, Smart and Nano-textiles
Publications
- Journal Articles: 17
- Book Chapters: 6
- Conference Papers: 6
Education/Academic Qualification
Textile Engineering, BSc, World University of Bangladesh
2011 → 2015
Award Date: 18 September, 2015
Textile Engineering, MSc, Bangladesh University of Textiles
2016 → 2019
Award Date: 01 September, 2019
Research expertise keywords
Smart Integration and Digitalization
Waste Management
Circular Fashion Economy
Sustainable Practices
Fashion and Textiles
📚
Research output
17
Article
5
Conference paper
0
Books
6
Books Chapter
2025
Islam, M., Shamsuzzaman, M., Ahmed, R., Al. Mamun, M.A. and Sayem, A.S.M., 2025. Sustainable Practices and Circularity in Fashion and Textiles Manufacturing. In SDG 12 and Global Fashion Textiles Production (pp. 193-213). Singapore: Springer Nature Singapore.
Research output
:
Contribution to chapter
›
Chapter
›
peer-review
Shamsuzzaman, M., Al. Mamun, M.A., Hasan, H.R.U., Hassan, R., Zulkernine, A., Atik, M.A.R. and Islam, M., 2025. Fashion Circularity: Potential of Reusing and Recycling Remnant Fabric to Create Sustainable Products. Sustainability, 17(5), p.2010.
Research output
:
Contribution to journal
›
Article
›
peer-review
Islam, M., Shamsuzzaman, M., Hasan, H.R.U. and Atik, M.A.R., 2025. Environmental Sustainability of Fashion Product Made from Post-Consumer Waste: Impact Across the Life Cycle. Sustainability, 17(5), p.1917.
Research output
:
Contribution to journal
›
Article
›
peer-review
Shamsuzzaman, M. and Islam, M., 2025. Environmental Sustainability Practices in Effluent Management of Fashion Manufacturing in Developing Country: Insights from Bangladesh. Cleaner Water, p.100085.
Research output
:
Contribution to journal
›
Article
›
peer-review
Shamsuzzaman, M., Islam, M., Mamun, M.A.A., Rayyaan, R., Sowrov, K., Islam, S. and Sayem, A.S.M., 2025. Fashion and textile waste management in the circular economy: a systematic review. Cleaner Waste Systems, p.100268.
Research output
:
Contribution to journal
›
Article
›
peer-review
2023
Md. Shamsuzzaman, Joy Sarkar and Dip Das (20 January 2023). “Investigating the Performance of Dry Processing on the Properties of Denim Garments”, 1st International Conference On Textile Science and Engineering, Bangladesh University of Textiles (BUTEX), Dhaka, Bangladesh. https://www.butex.edu.bd/wp-content/uploads/2023/08/ICTSE-107.pdf
Research output
:
Contribution to conference
›
Article
›
peer-review
Shamsuzzaman, M., Islam, M.M., Hasan, H.R.U., Khan, A.M. and Sayem, A.S.M., 2023. Mapping environmental sustainability of knitted textile production facilities. Journal of Cleaner Production, p.136900. https://doi.org/10.1016/j.jclepro.2023.136900.
Research output
:
Contribution to journal
›
Article
›
peer-review
Shamsuzzaman, M. et al. (2023). Waste Management in Textile Industry. In: Rahman, M.M., Mashud, M., Rahman, M.M. (eds) Advanced Technology in Textiles. Textile Science and Clothing Technology. Springer, Singapore. https://doi.org/10.1007/978-981-99-2142-3_10
Research output
:
Contribution to chapter
›
Chapter
›
peer-review
5. Khalil, E., Sarkar, J., Rahman, M.M., Shamsuzzaman, M., Das, D. (2023). Innovative Textile Printing Technology. In: Rahman, M.M., Mashud, M., Rahman, M.M. (eds) Advanced Technology in Textiles. Textile Science and Clothing Technology. Springer, Singapore. https://doi.org/10.1007/978-981-99-2142-3_5
Research output
:
Contribution to chapter
›
Chapter
›
peer-review
Khalil, E., Sarkar, J., Rahman, M.M., Shamsuzzaman, M., Das, D. (2023). Advanced Technology in Textile Dyeing. In: Rahman, M.M., Mashud, M., Rahman, M.M. (eds) Advanced Technology in Textiles. Textile Science and Clothing Technology. Springer, Singapore. https://doi.org/10.1007/978-981-99-2142-3_4
Research output
:
Contribution to chapter
›
Chapter
›
peer-review
Shamsuzzaman, M., Mashud, M., Rahman, M.M., Rahman, M.M., Hoq, E., Das, D. (2023). Management and Maintenance of Textile Machinery. In: Rahman, M.M., Mashud, M., Rahman, M.M. (eds) Advanced Technology in Textiles. Textile Science and Clothing Technology. Springer, Singapore. https://doi.org/10.1007/978-981-99-2142-3_2
Research output
:
Contribution to chapter
›
Chapter
›
peer-review
Mostafizur Rahman, M., Shamsuzzaman, M., Das, D., Abdus Shahid, M., Hoque, M.B. (2023). Introduction to Textiles and Textile Fibers. In: Rahman, M.M., Mashud, M., Rahman, M.M. (eds) Advanced Technology in Textiles. Textile Science and Clothing Technology. Springer, Singapore. https://doi.org/10.1007/978-981-99-2142-3_1
Research output
:
Contribution to chapter
›
Chapter
›
peer-review
2022
Saha T, Uddin Z, Islam MN, Shamsuzzaman M, Tahsin AA, Islam MD. Assessing the Effectiveness and Environmental Sustainability of Reactive Dyes for Their Structural Diversity.Textile & Leather Review. 2022; 5:103-119. https://doi.org/10.31881/TLR.2022.02 Publons, Croatia.
Research output
:
Contribution to journal
›
Article
›
peer-review
Exploring
environmental sustainability of fast fashion production: a comparative case
study between knit and denim factory
Md. Shamsuzzaman, Md. Mazedul Islam and Abu Sadat Muhammad Sayem, (2022), Exploring environmental sustainability of fast fashion production: a comparative case study between knit and denim factory, Textile and Fashion Innovative Congress, iLetters iCongress, Manchester Metropolitan University, UK.
Research output
:
Contribution to conference
›
Article
›
peer-review
2021
Md. Shamsuzzaman, Md. Mazedul Islam, HM Rakibul Hasan, Adnan Maroof Khan and Abu Sadat Muhammad Sayem, (2021), Environmental Sustainability Evaluation of Knit Dyeing Factory in Bangladesh, A Case Study, International Conference on Sustainable Textiles and Fashion Congress, iLetters iCongress, Manchester Metropolitan University, UK.
Research output
:
Contribution to conference
›
Article
›
peer-review
Shamsuzzaman, M. ., Abdul Awal, Z., & Das, D. (2021). Impact of Laser Intensities at Various DPI and Pixel Time on the Properties of Denim Garments. Journal of Advanced Research in Materials Science, 77(1), 1-13. https://doi.org/10.37934/arms.77.1.113Bottom of Form
Research output
:
Contribution to journal
›
Article
›
peer-review
Md Shamsuzzaman, Md. Abul Kashem, Abu Sadat Muhammad Sayem, Adnan Maroof Khan, Sayed Md. Shamsuddin, Md Mazedul Islam, 2021. Quantifying environmental sustainability of denim garments washing factories through effluent analysis: A case study in Bangladesh, Journal of Cleaner Production, Volume 290, 125740, pp. 1-13. ISSN 0959-6526, https://doi.org/10.1016/j.jclepro.2020.125740.
Research output
:
Contribution to journal
›
Article
›
peer-review
2020
Malaz Rahman Khan, Md. Shamsuzzaman Rasel, & Dip Das (2020), "Effect of Thread Count and Stitch Density (SPI) on 2/1 Twill Woven Fabric". International Journal of Science and Business. Volume: 4, Issue: 3 Page: 37-45. 2020. https://ijsab.com/volume-4-issue-3/2722
Research output
:
Contribution to journal
›
Article
›
peer-review
Md. Shamsuzzaman Rasel, Malaz Rahman Khan, Ziad Bin Abdul Awal and Dip Das (2020), "Impact of Thread Count and Stitch Density on Plain Woven Fabric". International Journal of Scientific & Engineering Research. Volume 11, Issue 1, January-2020. pp-922-926. https://www.ijser.org/onlineResearc hPaperViewer.aspx?Impact-of-Thread-Count-and-Stitch-Density-on-Plain-Woven-Fabric.pdf
Research output
:
Contribution to journal
›
Article
›
peer-review
Md. Shamsuzzaman, Ziad Bin Abdul Awal, Dip Das and Malaz Rahman Khan (2020), "Analysis of the Influence of Enzyme Wash, Acid Wash, Ice Wash and Pigment Wash on the Properties of Knit Garment". International Journal of Scientific Research and Engineering Development-– Volume3 Issue 1. pp. 213-218. http://www.ijsred.com/volume3/issue1/ IJSRED-V3I1P32.pdf
Research output
:
Contribution to journal
›
Article
›
peer-review
Md. Shamsuzzaman Rasel, Dip Das, Malaz Rahman Khan (2020), "Current Scenario of Textile Sector in Bangladesh (2019); A Comprehensive Review". International Journal of Innovative Studies in Sciences and Engineering Technology (IJISSET), Volume: 6 Issue: 1 | 2020, pp. 52-55. https://ijisset.org/storage/Volume6/ Issue1/IJISSET-060113.pdf
Research output
:
Contribution to journal
›
Article
›
peer-review
2019
Md.
Shamsuzzaman and Joy Sarkar (2019), "analysis of the influence of
different dry processes on the properties of denim garments" International
Conference on Mechanical Engineering and Renewable Energy 2019 (ICMERE2019) 11
– 13 December, 2019, Chittagong, Bangladesh.
Research output
:
Contribution to conference
›
Article
›
peer-review
Shamsuzzaman Rasel and Joy Sarkar (2019), "Manufacturing of fabric by recycling plastic bottles: An ecological approach Part 2: Manufacturing Process" Textile focus.com 23 March 2019. http://textilefocus.com/manufacturing-fabric-recycling-plastic-bottles-ecological-approach-part-2- manufacturing-process/
Research output
:
Contribution to journal
›
Article
›
not peer-review
Shamsuzzaman Rasel and Joy Sarkar (2019), "Manufacturing of fabric by recycling plastic bottles: An ecological approach (Part 1: Necessity)". Textile focus.com 10 February 2019. http://textilefocus.com
Research output
:
Contribution to journal
›
Article
›
peer-review
Dip Das, Md. Shamsuzzaman Rasel, Malaz Rahman Khan, Analysis of Production Loss and Way to Increase Productivity in a Particular Knitting Floor, International Journal of Textile Science, Vol. 8 No. 3, 2019, pp. 54-59. doi: 10.5923/j.textile.20190803.02
Research output
:
Contribution to journal
›
Article
›
peer-review
2018
Sizing of Warp Yarn with a
Different Concentration of Animal Fat and Acids and Determination of the
Performance in Comparing with Conventional Sized Yarn
Joy Sarkar and Md Shamsuzzaman Rasel (2018), "Sizing of Warp Yarn with a Different Concentration of Animal Fat and Acids and Determination of the Performance in Comparing with Conventional Sized Yarn". December 2018. Conference: International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE). At: Khulna University of Engineering & Technology (KUET), Khulna, Bangladesh
Research output
:
Contribution to conference
›
Article
›
peer-review
2017
Joy Sarkar and Shamsuzzaman Rasel (2017),
Research output
:
Contribution to journal
›
Article
›
not peer-review
2015
Solaiman, Abdur Rouf, Shamsuzzaman Rasel, Elias Khalil (2015) Investigation of Different Washing Effects on Physical and Mechanical Properties of Cotton Knitted Garments. Journal of Textile Science and Technology,01,101-109. doi: 10.4236/jtst.2015.13011
Research output
:
Contribution to journal
›
Article
›
peer-review
📖
Supervised Work
2023
Investigating the impact of sustainable garment washing
Nazmul Kabir, Abdul Jalil, 2023, (Unpublished)
Research output
:
Thesis
›
Undergraduate Thesis
2022
Development of sustainable waterproof garment
Md. Sajib Hossai and Imtiaz Ahmed, 2022, (Unpublished)
Research output
:
Thesis
›
Undergraduate Thesis
🤝
Participations
🏆
Awards
👥
Membership
📜
Certifications
2025
Environmental Management System: ISO-14001:2015 Active
AJA Bangladesh, Issued: 2025
Training Certificate
:
Environmental Management System
📊
Research Poster
